High Flow High Pressure Pump
Type BMS
If you have to test objects on different locations within your work-shop or in the field, the mobile pump system, BMS, will give you the possibility to test adequately on different sites. The wheels or forklift pockets make the BMS much easier to move in comparison to standard workshop units.
This high flow / high pressure system enables adequate testing and adapts ideally to your specific requirements for testing large volumes of objects at high pressure. The BMS is generally equipped with two air driven pumps, thus accelerating your operational process.
To test objects even quicker, the standard high flow high pressure pump integrated into the BMS can be expanded with a high flow low pressure air driven pump.
Benefits
• Mobile pressure unit
• Roburst design
• Suitable for pressurizing with oil, water or an emulsion of both
• Modular design with numerous options
Technical specification
| Feature | Technical specification |
| Max. operating pressure | 3.650 bar |
| Max. flow | 50 l/min |
| Materials | All critical components e.g. bleed valve, gauges, and wetted pump parts are in stainless steel or bronze. The frame is in stainless steel. |
| Test gauge | The test gauge has class 1.0% F.S., and a housing of ø 100 mm (4 inch), and is made fully out of stainless steel. |
Options
• Mechanical chart recorder
• PC data acquisition and recording system
• Multiple pumps
• Lid to cover the instruments
• Engraved panel
• Isolation valve
• Wheels
• Lifting pads
• Forklift pockets
• Float cock (if reservoir is present)